h221321

This kind of thread is useful because the same symptom can come from different causes. The best replies are the ones that show the exact setup, the tests performed, and what finally changed the result...

My experience has been that many mining problems are not one big failure but several small issues at once. A setup can look almost correct while still underperforming because of heat, weak airflow, ba...

What helped me most was writing down the exact symptoms before changing anything. Once I compared the dashboard, local logs, and power behavior together, the real cause became much easier to spot.

Thanks for posting this. I was trying to figure out the same thing today.

I think the key here is testing one change at a time instead of changing everything at once.

Same issue here. The miner looked connected, but it turned out the worker format was wrong.

I ran into this after changing pool settings and thought the machine was the problem. In my case the miner was fine, but the network path was unstable and the shares started coming through only after ...

What helped me most was writing down the exact symptoms before changing anything. Once I compared the dashboard, local logs, and power behavior together, the real cause became much easier to spot.

For anyone still troubleshooting this, the most useful sequence I found was: confirm the wallet and worker format first, then verify the stratum target, then check miner logs, then look at temperature...

What helped me most was writing down the exact symptoms before changing anything. Once I compared the dashboard, local logs, and power behavior together, the real cause became much easier to spot.

My experience has been that many mining problems are not one big failure but several small issues at once. A setup can look almost correct while still underperforming because of heat, weak airflow, ba...